Medema Mini Crosser M-MaxX User Manual download pdf (Page 29)

User guide P9-0135-B 29 of 52 Version 1.0.3/2012

Medema Production A/S

Changing the wheels

If you get a puncture in one of the pneumatic tyres or if a

tyre is so badly worn that it needs to be replaced, follow the

instructions below.

Tyres and inner tubes can be purchased from the authorised

dealer who supplied the Mini Crosser.

The Mini Crosser must be TURNED OFF before you start.

Changing the wheels on

the 4W model

5 mm Allen key

• Undo the ﬁ ve bolts.

• Take the wheel off.

• When the wheel is put

back on, the spring

washers must be reﬁ tted

between the wheel rim

and bolts.

The bolts must be done

up tightly.

REMEMBER!

• to let all the air out before taking

the wheel apart to repair a puncture

• to secure the bolts with spring

washers

Remove the valve cap

and use a screwdriver, or

similar, to open the valve

so that the air can be

released.

There is a risk of bursting

the wheel rim if the two

rim halves are separated

while there is air in the

tyre.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

No comments

Medema Mini Crosser M-MaxX User Manual Page 29