Medema Mini Crosses M2 4W Cabin User Manual download pdf (Page 19)

User guide P9-0152-B 19 of 60 Version 3.0.0/2013

Medema Production A/S

Braking systems

There are three braking systems on the Mini Crosser:

• Motor brake - adjusts vehicle speed also when going downhill.

• Magnetic brake - the magnetic brake is automatic and

engages when the Mini Crosser stops. In an emergency,

the Mini Crosser can be stopped instantaneously by turning

the key switch. Please note that this will cause very sharp

braking.The brake must never be disengaged mechanically

using the disengagement lever on a slope. This function is

only designed for use when pushing the Mini Crosser on a

ﬂ at road.

• Electric safety brake - if the brake is somehow disengaged on

a slope/hill, the Mini Crosser will brake automatically when it

reaches a certain speed. There is an electric safety feature in the

control system, which works even if the battery is disconnected.

This is also the reason why the Mini Crosser cannot be towed at

more than 5 km/h. See the section about towing.

• Handbrake - intended as an emergency brake and parking

brake. It must be operated with caution when driving in

slippery conditions and downhill.

General safety advice

Make sure that the backrest is upright and the seat is as low as

possible.

Positioning belts are recommended if the user is unable to

maintain a good driving posture independently.

Adjust your driving to road conditions. Take account of light,

trafﬁ c and weather. Be particularly careful when driving in the

When using the handbrake as a parking

brake, lock it in braking position by

pressing the button in while applying the

brake.

To release the brake, press the button

again.

Handbrake lock

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

No comments

Medema Mini Crosses M2 4W Cabin User Manual Page 19