Medema Mini Crosses M2 4W Cabin User Manual download pdf (Page 38)

User guide P9-0152-B 38 of 60 Version 3.0.0/2013

Medema Production A/S

Take the rear cover off. The plastic cover can be removed by squeezing the sides.

Now the fuses can be replaced.

Fuses

The Mini Crosser has the following protection systems:

• As a safeguard against overheating There are two switches

are integrated in the engine. By incipient overheating speed is

reduced to half power, and by prolonged overheating the scooter

will stop. After cooling for 3 to 5 minutes, the scooter is able to

reach full speed and traction.

• The control fuse protects against mains faults. It is located under

the rear cover.

• The main fuse protects against short-

circuits in the main current circuit.

The fuses are located under the rear

cover behind the batteries. Fuse type

DIN 2581 - 100A.

• If the ignition key is turned at the

same time as the accelerator is

operated, the vehicle will not move off

for safety reasons.

• The lights and horn are protected by electronic fuses, which

protect against any short-circuiting that may occur. To prevent

accidental short-circuiting when a bulb is changed, the Mini

Crosser must be turned off when the new bulb is ﬁ tted and then

turned on again afterwards.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

No comments

Medema Mini Crosses M2 4W Cabin User Manual Page 38